Article
| Sl. | Details |
|---|---|
| 1 | Dr. Md. Khorshed Alam , Diffusion Driven Charge Storage in Defect Engineered NiO/CoS2 Heterostructure Nanoscale Advances/ Royal Society of Chemistry ,04 Nov 2026 |
| 2 |
Abstract: The growing demand for compact and efficient transmission-wave and antenna systems necessitates ferrite materials with low dielectric loss, stable impedance matching, and high magneto–dielectric coupling. In this study, lanthanum-substituted Co0.5Cu0.5LaxFe2-xO4 ferrites (x = 0.00–0.09) were synthesized using a conventional solid-state route to address these challenges. The choice of La3+ doping was motivated by its large ionic radius and ability to tailor cation distribution, lattice strain, and interfacial polarization. X-ray diffraction confirmed a predominant spinel phase with minor orthoferrite traces at higher La3+ contents, while the lattice parameter exhibited a non-linear variation (8.380 → 8.365 Å) with substitution. SEM revealed well-defined grains with reduced average size (180.25 → 125 µm), and energy-dispersive spectroscopy confirmed the presence of the constituent elements. Optical analysis showed strong UV absorption and an increased band gap (3.80–4.63 eV), attributed to lattice distortion and reduced defect density. Dielectric measurements demonstrated a marked variation in ε′ (1305 → 151), ε″ (2016 → 91), and tanδɛ (2.22 → 0.86) at 100 Hz, consistent with Maxwell–Wagner and interfacial polarization effects. Impedance spectra revealed two distinct semicircular arcs, signifying contributions from both grains and grain boundaries, with improved grain-boundary conductivity in La3+-doped samples. Magnetic studies showed that μ′ (8–12) and μ″ (2797–3804) at 100 Hz varied with La3+ substitution, and magnetic Nyquist arcs compressed with La3+ addition, indicating enhanced AC conductivity and reduced domain-wall damping. Notably, the composition with x = 0.06 exhibited optimal magnetic quality, superior impedance matching (~ 0.86), and stable frequency response near 0.78 MHz. These outcomes demonstrate that La3+ incorporation effectively enhances magneto–dielectric energy efficiency and impedance stability, making Co–Cu–La ferrites promising for next-generation miniaturized antenna and high-frequency communication applications. |
| 3 |
|
| 4 |
Abstract: In response to the increasing demand for eco-friendly and sustainable materials, this study presents the development of polypropylene (PP)-based hybrid eco-friendly nanocomposites reinforced with banana midrib fiber (BF) and reduced graphene oxide (rGO). BF are extracted from the midrib of banana leaf residue using a combination of thermal and chemical treatments. High degree of reduction rGO is synthesized from graphene oxide (GO) through a low-temperature thermal reduction process at 120 °C. The hybrid composites are fabricated via extrusion molding, ensuring uniform dispersion of the fillers. Significant enhancements in mechanical properties are achieved for PP composite at 7 wt% BF and 0.7 wt% rGO loading, where the increase in Young’s modulus is ~ 138%, tensile strength is ~ 35%, flexural modulus is ~ 333%, and flexural strength is ~ 34% compared to neat PP. Electrical analysis showed a DC conductivity of ~ 8.4 mS/m and an AC conductivity of ~ 2.2 × 10⁻5 S/m, while the dielectric constant reached ~ 10.72 at 1 kHz of the composite. These results highlight the probable of BF/rGO-reinforced PP composites for lightweight, cost-effective, and supportable applications in automotive components and EMI shielding systems. |
| 5 | |
| 6 |
Abstract |
| 7 |
Abstract: Cell permeabilization techniques are widely used to enable intracellular delivery of therapeutic molecules. Although these methods show promise for drug delivery and gene therapy, controlling and quantifying molecular transport at the nanoscale remains a significant challenge due to the structural complexity of mammalian cells. Multivesicular vesicles (MVVs), consisting of a large outer vesicle encapsulating multiple smaller vesicles, offer a simplified biomimetic platform that captures key aspects of cellular compartmentalization of mammalian cells. In this study, we employed finite element method (FEM)-based simulations using COMSOL Multiphysics to investigate passive molecular transport through permeabilized MVVs. The model incorporated biologically relevant pore sizes and three commonly used fluorescent probes of increasing molecular size: Calcein, Texas-red dextran 3000 (TRD-3k), and TRD-10k. The results reveal size-dependent accumulation kinetics. Additionally, transport efficiency was enhanced with increased pore diameter, indicating that both molecular and structural parameters influence delivery outcomes. Importantly, the simulations demonstrate that compartmentalized vesicle structures cause transport to vary across space and time. The model successfully matches experimental results seen in permeabilized vesicles and expands them to more complex nested vesicle systems. These findings highlight the role of vesicle architecture in shaping transport outcomes and provide a computational framework for exploring compartmentalization effects relevant to intracellular delivery strategies. |
| 8 |
Abstract Biomembranes regulate molecular transport essential to cellular function and numerous biomedical applications, such as drug delivery and gene therapy. This study simulates molecular transport through nano-sized multipores in Giant Unilamellar Vesicles (GUVs) using COMSOL Multiphysics. We analyzed the diffusion dynamics of fluorescent probes—including Calcein, Texas-red dextran 3000 (TRD- 3k), TRD- 10k, and Alexa Fluor-labeled soybean trypsin inhibitor (AF-SBTI)—across different pore sizes, and derived rate constants using curve fitting that closely align with experimental data. Additionally, an analytical model based on Fick’s law of diffusion provides further insight into transport efficiency. This approach offers a novel perspective by examining simultaneous transport through multiple nanopores, which better mimics realistic biological environments compared to traditional single-pore studies. We used COMSOL for efficiently simulating large-scale, multi-nanopore systems, particularly in biomedical applications where modeling of complex transport phenomena is essential. This work provides new insights into multipore-mediated transport, critical for optimizing nanopore-based drug delivery and advancing the understanding of cellular transport mechanisms. Attachment Read more |
| 9 |
Journal: Journal of Polymer Research, Publisher: Springer Link, Rank = Q2, IF= 2.9 Abstract: Natural fiber has attracted considerable interests as reinforcing agents in polymer composites for the transportation industry because of their low cost, lightweight, strong mechanical performance, and eco-friendly advantages. This study investigates the banana midrib fiber (BF) incorporated polypropylene (PP)-based composites using extrusion molding. The mechanical properties of the resulting biocomposites exhibited substantial improvements, with an increase in Young’s modulus by 79%, tensile strength by ~ 23%, and flexural modulus by 128% at a fiber content of 7 wt%. Additionally, the yield modulus and resilience of the composites increased by ~ 31% and 39% at the same fiber concentration. Thermal stability improved with a 10 °C increase in Tonset temperature compared to neat PP, indicating enhanced thermal stability. Fourier transform infrared spectroscopy confirms the chemical interactions between the fiber and PP matrix, while field emission scanning electron microscopy provided insights into fiber-matrix interfacial bonding through fractured and smooth surface analysis. These findings emphasize the important influence of fiber content on improving the mechanical and thermal properties of PP/BF composites. Furthermore, the results demonstrate the potential of BF-reinforced PP composites as lightweight, cost-efficient, and sustainable materials for use in automotive applications. |
| 10 |
Journal: Bangladesh Journal of physics, Publisher: Bangladesh Physical Society Abstract: Coal-based thermal power plants are essential for meeting the growing energy demands of developing countries like Bangladesh. However, their environmental impact, particularly on agriculture and ecosystems, raises serious concerns. This study assesses the environmental consequences of the Payra Thermal Power Plant in the Kalapara region, focusing on air, water, and soil quality, as well as agricultural productivity and biodiversity. This study analyzed key pollutants (SO₂, NOx, PM, and heavy metals from fly ash) and their impact on soil fertility, crop yield, and aquatic biodiversity. Additionally, greenhouse gas emissions such as carbon dioxide (CO₂), methane (CH₄), and nitrous oxide (N₂O) contribute to climate change and local air pollution. Field data were collected through air and water quality monitoring, soil analysis, and structured farmer surveys within a 9 km radius of the plant. The findings indicate a decline in agricultural output, contamination of water bodies, and disruptions in fish populations, particularly the economically significant Ilish fish. The study highlights the urgent need for mitigation strategies, including advanced emission control technologies, sustainable waste management, and stricter environmental regulations, to minimize ecological degradation while maintaining energy production. |
Department of Physics
