University of Barishal

বরিশাল বিশ্ববিদ্যালয়

Publications

Sl. Details
1 Dr. Md. Khorshed Alam , Diffusion Driven Charge Storage in Defect Engineered NiO/CoS2 Heterostructure Nanoscale Advances/ Royal Society of Chemistry ,04 Nov 2026
2

Abstract:The growing demand for compact and efficient transmission-wave and antenna systems necessitates ferrite materials with low dielectric loss, stable impedance matching, and high magneto–dielectric coupling. In this study, lanthanum-substituted Co0.5Cu0.5LaxFe2-xO4 ferrites (x = 0.00–0.09) were synthesized using a conventional solid-state route to address these challenges. The choice of La3+ doping was motivated by its large ionic radius and ability to tailor cation distribution, lattice strain, and interfacial polarization. X-ray diffraction confirmed a predominant spinel phase with minor orthoferrite traces at higher La3+ contents, while the lattice parameter exhibited a non-linear variation (8.380 → 8.365 Å) with substitution. SEM revealed well-defined grains with reduced average size (180.25 → 125 µm), and energy-dispersive spectroscopy confirmed the presence of the constituent elements. Optical analysis showed strong UV absorption and an increased band gap (3.80–4.63 eV), attributed to lattice distortion and reduced defect density. Dielectric measurements demonstrated a marked variation in ε′ (1305 → 151), ε″ (2016 → 91), and tanδɛ (2.22 → 0.86) at 100 Hz, consistent with Maxwell–Wagner and interfacial polarization effects. Impedance spectra revealed two distinct semicircular arcs, signifying contributions from both grains and grain boundaries, with improved grain-boundary conductivity in La3+-doped samples. Magnetic studies showed that μ′ (8–12) and μ″ (2797–3804) at 100 Hz varied with La3+ substitution, and magnetic Nyquist arcs compressed with La3+ addition, indicating enhanced AC conductivity and reduced domain-wall damping. Notably, the composition with x = 0.06 exhibited optimal magnetic quality, superior impedance matching (~ 0.86), and stable frequency response near 0.78 MHz. These outcomes demonstrate that La3+ incorporation effectively enhances magneto–dielectric energy efficiency and impedance stability, making Co–Cu–La ferrites promising for next-generation miniaturized antenna and high-frequency communication applications.

3
Abstract: Developing efficient, non-toxic perovskite solar cells (PSCs) is vital for sustainable photovoltaics (PVs), yet most lead (Pb)-free materials still fall short of Pb-based performance. To overcome this problem, we present a novel heterojunction Al/FTO/TiO2/CH3NH3SnI3/Sb2S3/Au solar cell structure and investigated using the SCAPS-1D simulation. In this numerical study, CH3NH3SnI3-based PSC integrated with various organic and inorganic charge transport layers, TiO2 as electron transport layer (ETL), and Sb2S3 as hole transport layer (HTL) significantly outperforms organic alternatives (PTAA, P3HT, C60). The proposed PSC achieves a simulated power conversion efficiency (PCE) of 32.88% under ideal conditions, with a Voc of 1.08 V, Jsc of 34.39 mA/cm², and FF of 88.26%. Additionally, the PV characteristics of the proposed PSC are studied by varying different absorber parameters such as thickness, doping concentration, defect density, and optimized conditions are identified for maximum PV output. Temperature analysis, metal work function, and series/shunt resistance studies are also evaluated. Moreover, eleven machine learning (ML) models are trained on 29,514 unique SCAPS-1D-generated device configurations using eight perovskite absorber parameters. Among them, XGBoost achieved the highest predictive accuracy (R² = 0.9992, RMSE = 0.0686, MAE = 0.0454, RRMSE = 0.21%) among the eight absorber parameters. Feature importance and SHAP analysis from the XGBoost model identified electron affinity as the most influential parameter with 23.60% relative importance. Pearson correlation findings also align with these results. This integrated simulation and ML framework establishes an approach to designing high-efficiency, non-toxic Pb-free PSCs in sustainable photovoltaic technology.
4

Abstract: In response to the increasing demand for eco-friendly and sustainable materials, this study presents the development of polypropylene (PP)-based hybrid eco-friendly nanocomposites reinforced with banana midrib fiber (BF) and reduced graphene oxide (rGO). BF are extracted from the midrib of banana leaf residue using a combination of thermal and chemical treatments. High degree of reduction rGO is synthesized from graphene oxide (GO) through a low-temperature thermal reduction process at 120 °C. The hybrid composites are fabricated via extrusion molding, ensuring uniform dispersion of the fillers. Significant enhancements in mechanical properties are achieved for PP composite at 7 wt% BF and 0.7 wt% rGO loading, where the increase in Young’s modulus is ~ 138%, tensile strength is ~ 35%, flexural modulus is ~ 333%, and flexural strength is ~ 34% compared to neat PP. Electrical analysis showed a DC conductivity of ~ 8.4 mS/m and an AC conductivity of ~ 2.2 × 10⁻5 S/m, while the dielectric constant reached ~ 10.72 at 1 kHz of the composite. These results highlight the probable of BF/rGO-reinforced PP composites for lightweight, cost-effective, and supportable applications in automotive components and EMI shielding systems.

5

Abstract:
Electroporation refers to the formation of pores in the membranes of cells or vesicles induced by an electric field. This technique is widely applied in gene therapy, drug delivery, cancer treatment, and molecular biology to enhance the uptake of nucleic acids, proteins, or drugs into cells by temporarily permeabilizing their membranes using an electric field. In this report, we have investigated pore dynamics in charged, neutral, and cholesterol-containing membranes under constant and pulsating direct current (DC) electric fields of 0.3 V/nm using molecular dynamics (MD) simulations, and we have presented a comparative analysis of the resulting pore behaviors. Under a constant DC electric field, pore opening occurred faster than pore closing. In contrast, under a pulsating DC field, the pore opening time was longer than the pore closing time. Additionally, the cholesterol-containing bilayer required a longer time to initiate pore formation compared to charged and neutral membrane systems. Moreover, the pulsating DC electric field-induced poration time was longer compared to the constant DC field-induced poration time for charged, neutral, and cholesterol-containing membranes. At the moment of pore formation, the solvent accessible surface area, the number of hydrogen bonds, dipole moment, and dielectric constant for all the models rapidly increased, which helped to elucidate precisely the pore dynamics. These findings might be helpful in design a more effective membrane-based electroporation techniques that have significant biotechnological and biomedical applications.
6

Abstract

This article delves into the development of Y-doped cobalt-copper ferrites (Co₀.₅Cu₀.₅YₓFe₂₋ₓO₄) and their enhanced magneto-dielectric properties for high-frequency applications. The study systematically investigates how varying concentrations of yttrium (x = 0.00, 0.03, 0.06, 0.09) influence the structural, magnetic, and dielectric characteristics of the ferrites. Key findings include lattice expansion, grain refinement, and improved crystallinity with Y³⁺ doping, alongside a significant reduction in dielectric loss and enhanced impedance matching. The optimal composition (x = 0.09) exhibits the highest magnetic permeability, a stable impedance matching ratio of ~0.68, and a broad effective bandwidth for microwave absorption, making it particularly suitable for miniaturized antennas and high-frequency devices. The research combines advanced characterization techniques such as XRD, SEM, UV–Vis spectroscopy, and impedance spectroscopy to provide a detailed understanding of the material's behavior. Additionally, the study explores the optical properties, revealing a widening bandgap with increasing Y content, which contributes to improved transparency and reduced defect states. The magneto-dielectric coupling is analyzed in depth, demonstrating how Y³⁺ doping optimizes the balance between magnetic permeability and dielectric permittivity, crucial for efficient signal propagation. Simulated reflection loss analysis further confirms the potential of the Y-doped ferrites for high-frequency electromagnetic applications. This work not only advances the understanding of rare-earth-doped ferrites but also provides practical insights for designing next-generation compact antenna systems with superior performance and stability.

7

Abstract:

Cell permeabilization techniques are widely used to enable intracellular delivery of therapeutic molecules. Although these methods show promise for drug delivery and gene therapy, controlling and quantifying molecular transport at the nanoscale remains a significant challenge due to the structural complexity of mammalian cells. Multivesicular vesicles (MVVs), consisting of a large outer vesicle encapsulating multiple smaller vesicles, offer a simplified biomimetic platform that captures key aspects of cellular compartmentalization of mammalian cells. In this study, we employed finite element method (FEM)-based simulations using COMSOL Multiphysics to investigate passive molecular transport through permeabilized MVVs. The model incorporated biologically relevant pore sizes and three commonly used fluorescent probes of increasing molecular size: Calcein, Texas-red dextran 3000 (TRD-3k), and TRD-10k. The results reveal size-dependent accumulation kinetics. Additionally, transport efficiency was enhanced with increased pore diameter, indicating that both molecular and structural parameters influence delivery outcomes. Importantly, the simulations demonstrate that compartmentalized vesicle structures cause transport to vary across space and time. The model successfully matches experimental results seen in permeabilized vesicles and expands them to more complex nested vesicle systems. These findings highlight the role of vesicle architecture in shaping transport outcomes and provide a computational framework for exploring compartmentalization effects relevant to intracellular delivery strategies.

8

Hossain, R., & Mahmud, R. (2026). The Monsoon Revolution and Limitations of Police Reform in Bangladesh. South Asia Research, 02627280261498556. https://doi.org/10.1177/02627280261498556 

Attachment Read more
9

Title: The Socio-Economic Vulnerabilities of the Senior Citizen: A Study on Ujalkur Union in Rampal Upazila, Bagerhat District

Authors: Delara Yousuf Prome, Md. Ohidur Zaman *

Journal: Barishal University Journal of Social Sciences; Vol-5 (1&2), 73-88 (2025)

Attachment
10 Dr. A.T.M. Rafiqul Islam , Azolla-based compost enhances growth and yield performance in rice (Oryza sativa L.) Plant Trends ,25 Oct 2026 Attachment Read more